9-30725
AirSense Stratos Micra 10 High Sensitivity Smoke Detector
- Ultra small low cost aspirating smoke detector for easy and discreet installation
- High sensitivity provided by laser based forward light scatter for reliable early warning
- Single sampling pipe up to 50m in length (still air)
- Unique ClassiFire® Perceptive Artificial Intelligence system that dynamically adjusts the detector’s operating parameters, allowing for day to day changes in the protected environment and dust separation system contamination
- Unwanted alarms from dust are avoided using patented Dual Technology LDD 3D3 Laser Dust Discrimination and elimination system
Related products
At a glance
Description
The AirSense Micra 10 is designed to provide very high sensitivity smoke detection in a small package.
ClassiFire Perceptive Artificial Intelligence ensures that the detector operates at optimum sensitivity for the protected environment, without the need for complex setup. This means the product will configure itself to provide high sensitivity in a computer room or reduced sensitivity in a smoky area.
The detector is designed to fit into a Docking Station. All sampling pipes and cables are connected to the Docking Station as a first fix operation leaving the detector to be fitted during the final commissioning phase if required. This ensures that detectors are less likely to be damaged during the installation.
Upgradable volt-free Fire and Fault relay outputs are available for remote monitoring by local fire detection or BMS systems.
ClassiFire Perceptive Artificial Intelligence ensures that the detector operates at optimum sensitivity for the protected environment, without the need for complex setup. This means the product will configure itself to provide high sensitivity in a computer room or reduced sensitivity in a smoky area.
The detector is designed to fit into a Docking Station. All sampling pipes and cables are connected to the Docking Station as a first fix operation leaving the detector to be fitted during the final commissioning phase if required. This ensures that detectors are less likely to be damaged during the installation.
Upgradable volt-free Fire and Fault relay outputs are available for remote monitoring by local fire detection or BMS systems.
Typical Applications
• Data storage units
• Prison cells
• Plant rooms
• Air conditioning units
• Equipment racks
• Computer rooms
• Air duct protection
• Heritage property protection
• Critical equipment
• Anti-smoking enforcement
• Motor rooms
• Prison cells
• Plant rooms
• Air conditioning units
• Equipment racks
• Computer rooms
• Air duct protection
• Heritage property protection
• Critical equipment
• Anti-smoking enforcement
• Motor rooms
Options Available
• Addressable Protocol Interface Cards APIC™ available
• Relay expansion card
• Relay expansion card
Details
- Ultra small low cost aspirating smoke detector for easy and discreet installation
- High sensitivity provided by laser based forward light scatter for reliable early warning
- Single sampling pipe up to 50m in length (still air)
- Unique ClassiFire® Perceptive Artificial Intelligence system that dynamically adjusts the detector’s operating parameters, allowing for day to day changes in the protected environment and dust separation system contamination
- Unwanted alarms from dust are avoided using patented Dual Technology LDD 3D3 Laser Dust Discrimination and elimination system
- CPR approved
Technical specifications
| General | ||
|---|---|---|
| Status indication |
LED
|
|
| Alarm levels |
4 (Aux, Pre-alarm, Alarm and Alarm 2)
|
|
| Electrical | ||
|---|---|---|
| Operating voltage |
21.6 to 26.4 VDC
|
|
| Current consumption |
250 mA
|
|
| Detection | ||
|---|---|---|
| Detection principle |
Laser light scattering mass detection and particle evaluation
|
|
| Range |
0.3% to 25% (%Obs/m)
|
|
| Particle sensitivity range |
0.003μ to 10μ
|
|
| Sampling pipe | ||
|---|---|---|
| Length |
50 m maximum run (25 m in moving air)
|
|
| Inlet quantity |
1
|
|
| Exhaust |
1 (optional)
|
|
| Output | ||
|---|---|---|
| Output quantity |
2 - Alarm (n/o) and Fault (n/c)
|
|
| Output type and rating |
500 mA @ 30 V
|
|
| Physical | ||
|---|---|---|
| Physical dimensions |
145 x 220 x 85 mm (W x H x D)
|
|
| Net weight |
1.7 kg
|
|
| Colour |
Cream
|
|
| Cable entries |
2 x M20
|
|
| Material (body) |
Sheet steel enclosure
|
|
| Environmental | ||
|---|---|---|
| Operating temperature |
-10 to +60°C (EN54-20)
|
|
| Relative humidity |
0 to 90% noncondensing
|
|
| Environment |
Indoor
|
|
| IP rating |
IP40
|
|
| Regulatory | ||
|---|---|---|
| Certification |
EN54-20
|
|
| Sampling pipework | ||
|---|---|---|
| Diameter | 27mm OD | |
| Amount of Class A holes (high sensitivity) | up to 2 holes | |
| Amount of Class B holes (enhanced sensitivity) | up to 4 holes | |
| Amount of Class C holes (normal sensitivity) | up to 10 holes | |
| Outputs | ||
|---|---|---|
| Expansion | Optional input and relay card | |
| Networking | ||
|---|---|---|
| SenseNET (RS-485) | Not supported | |
Downloads
All downloadsDatasheet
Technical documentation
Certificates
CPD / CPR
If available, the downloads of the Certificates, Software & Firmware and Media are displayed in their default language.