Skip to main content

FAW355WC

Conventional VAD, Deep Base, Wall Mount - White Flash
  • Automatic syncronisation
  • Anti-Tamper locking mechanism
  • Deep mouting base
  • Wiring directly to base
  • Flash rate selectable
View all

At a glance

General

The FAW355W is a general purpose wall mount LED beacon for fire alarm applications. It features a special deep base containing all wiring connections and allow for easy removal/placement of the device. With an EN54-23 approved coverage pattern of W-3.1-11.3, each FAW355WC may be mounted up to 3.5m high and cover a square room of 11.3 x 11.3m with a single device.

Easy and Fast Installation

The FAx350 beacons allow faster installation and maintenance thanks to an innovative mounting base. Dispensing with the need for locking screws, these becons use a deep base version of the TimeSaver™ bases from the 630 series detectors. Heads are simply locked onto the base with a “twist and click” action, allowing fitting or removal at any time because the base is the only component that needs to be wired. As the cabling requirement is reduced, commissioning time and costs are naturally reduced as well.

Efficient and versatile

The FAx350 beacons utilise a specially designed lens giving a uniformed light output over the specified coverage area. The flash rate of the beacon may be adjusted during installation, with a selection of 0.5Hz or 1Hz.

The mechanism for locking the device to the base may be activated if required. Once activated, a special tool is required to remove the beacon from the base.

Details

  • Automatic syncronisation
  • Anti-Tamper locking mechanism
  • Deep mouting base
  • Wiring directly to base
  • Flash rate selectable
  • IP65 Ingress protection

Technical specifications

General
Line monitoring
Polarised input
Electrical
Operating voltage
17 to 60 VDC
Current consumption
20 mA @ 0.5 Hz / 40 mA @ 1 Hz
Sounder
Output level
Continuous operation
Synchronization
Phased start (Automatic)
VAD
Colour
White
Flash frequency
0.5 Hz or 1 Hz
Physical
Physical dimensions
100 x 104 mm (Ø x D)
Net weight
250 g
Colour
White
Mounting type
Wall mount
Mounting height
up to 3.1 m
Material
High impact polycarbonate
Environmental
Operating temperature
-25 to +70°C
Relative humidity
5 to 95% noncondensing
Environment
Indoor
Outdoor
IP rating
IP65
Regulatory
Certification
EN54-23
EN54-23 rating
Light coverage W-3.1-11.3
Floor coverage up to 11.3 m x 11.3 m