Skip to main content

FCX-191-200

Fusion Wireless Detector Base w/ Sounder & Red VID
  • Easy to install
  • Electronic addressing
  • Self-monitoring
  • Proven technology
  • Eliminates cable installation problems
View all

At a glance

General

The FCX-191-200 is a wireless detector base with built in sounder (FAD) and visual indicator (VID) for use with point type, Fusion wireless detectors. It is ideal for applications where cable interface is difficult to manage or impossible to achieve.
The base connects wirelessly to the Fusion interface unit, which in turn transmits the wireless detector signal to the fire panel hardware loop.

The Range

The Fusion series consists of:

· Optical Smoke Detectors
· Multisensor Smoke Detectors
· A1R Heat Detectors
· CS Heat Detectors
· Sounders in red and white
· Combination Sounder VIDs and VADs
· Manual Call Points
· Interface Modules

Operating Principle

Wireless devices are often installed in buildings where wiring presents a challenge because the fabric of the building or its design is negatively affected by the use of cables. It could also be difficult to introduce cable runs into heritage buildings. It is for these architecturally sensitive buildings that the Fusion series was developed.
Every Fusion device is assigned an address from is base. This address is converted by the Fusion wireless loop interface to a device address similar to a wired device connected directly to the loop wiring.

Details

  • Easy to install
  • Electronic addressing
  • Self-monitoring
  • Proven technology
  • Eliminates cable installation problems
  • Uses 868 MHz radio channels

Technical specifications

General
Wireless frequency
868 MHz
Compatibility
Fusion gateway FCX-532-001
Electrical
Power supply type
Batteries
Batteries
3x AA Alkaline (Panasonic LR6AD Powerline / Varta 4006 Industrial)
3x C Alkaline (Panasonic LR14AD Powerline / Varta 4014 Industrial)
Power consumption
< 1 W
Operating voltage
3.5 to 4.5 VDC
Current consumption
0.2 to 300 mA
Output transmitter power
0 to 25 mW
Sounder
Output level
< 87 dB(A) @ 1 m
Output level adjustment
13 dB
Frequency
Selectable
Selectable tones
4
No. of stages
2
VID
Colour
White
Physical
Physical dimensions
146 x 53 mm (Ø x d)
Colour
White
Mounting type
Ceiling mount
Mounting position
Ceiling
Environmental
Vandal proof
No
Operating temperature
-10°C to 55°C
Storage temperature
5°C to 30°C
Relative humidity
< 95% non-condensing
Environment
Indoor
IP rating
IP23
Regulatory
Compliancy
CE
REACH
RED (2014/53/EU)
RoHS 2
WEEE
Certification
BOSEC
CPR
Standards
EN54-3
EN54-13