ZX832-3B
Ziton series addressable multisensor (Optica/heat)
- Multi-criteria fire sensing
- Enhanced detection certainty
- False alarm discrimination
- Fuzzy logic algorithms
- User selectable algorithms
Related products
At a glance
General
The ZX832-3B is a BLACK, addressable optical/heat multi criteria detector for Ziton ZP7 compatible fire alarm systems. The ZX832 multisensor represents the next generation of fire detectors giving an earlier warning of fire or smoke with the ability to discriminate against false alarms. Fuzzy logic software using multi-criteria sensing form the basis of this advanced optical and heat detector.
The detector consists of integrated high sensitivity smoke and thermal sensors. The system combines the dynamic results of rates of change patterns and absolute levels of smoke and heat, to identify real fire criteria. Selectable software algorithms allow the response to be matched to each particular hazard. Algorithms can change for day/night operation.
The detector consists of integrated high sensitivity smoke and thermal sensors. The system combines the dynamic results of rates of change patterns and absolute levels of smoke and heat, to identify real fire criteria. Selectable software algorithms allow the response to be matched to each particular hazard. Algorithms can change for day/night operation.
Advanced self test facility
Units are of low-profile design and plug into either a surface, or a semi-recessed base. An automatic facility is provided to lock the detector into its base, requiring a special tool to remove. The ZX832 contains a built-in LED that illuminates when the detector is in an alarm condition.
An advanced self test facility excites the smoke chamber as though smoke were present, and fully tests the complete sensor as well as communication with the panel.
ZX832 detectors are suited to applications requiring the highest level of alarm integrity. Each detector can protect and area up to 100m², subject to room and ceiling design and local codes. If the detector is intended to be used in thermal-only mode at certain times, then maximum coverage area is 50m².
An advanced self test facility excites the smoke chamber as though smoke were present, and fully tests the complete sensor as well as communication with the panel.
ZX832 detectors are suited to applications requiring the highest level of alarm integrity. Each detector can protect and area up to 100m², subject to room and ceiling design and local codes. If the detector is intended to be used in thermal-only mode at certain times, then maximum coverage area is 50m².
Automatic calibration
The ZX832 is a standard ZP7 addressable device that uses the ZP7 addressing system. Up to 127 devices may be connected to each ZP7 address loop. The system automatically compensates each sensor individually for calibration changes caused by dirt, temperature, humidity, voltage fluctuations and long term contamination.
Details
- Multi-criteria fire sensing
- Enhanced detection certainty
- False alarm discrimination
- Fuzzy logic algorithms
- User selectable algorithms
- Microprocessor based
- EN54:5 and 7 approved, and CPR certified
Technical specifications
| General | ||
|---|---|---|
| Status indication |
Alarm LED (red)
|
|
| Compatibility |
Ziton addressable systems
|
|
| Connectivity |
2-wire loop
|
|
| Addressing method |
DIP Switches
|
|
| Electrical | ||
|---|---|---|
| Power supply type |
Loop powered
|
|
| Operating voltage |
19.5 to 20.5 V
4 V (Max. line loss)
|
|
| Current consumption |
600 µA (Quiescent)
700 µA (Alarm)
|
|
| Detection | ||
|---|---|---|
| Detection principle |
Smoke & Heat
|
|
| Monitoring |
Alarm threshold
Continuously self-checking
Fault
|
|
| Sensitivity |
Configurable
|
|
| Coverage area |
100 m² (Optical)
50 m² (Heat)
|
|
| Output | ||
|---|---|---|
| Output quantity |
1
|
|
| Output type and rating |
Remote indicator
|
|
| Remote alarm output |
Yes
|
|
| Physical | ||
|---|---|---|
| Physical dimensions |
106 x 58 mm
|
|
| Net weight |
105 g (excluding base)
|
|
| Colour |
Black (RAL 9005)
|
|
| Mounting type |
Base mount
Ceiling mount
Recessed mount
|
|
| Material (body) |
Moulded ABS
|
|
| Finish | Medium gloss | |
| Environmental | ||
|---|---|---|
| Vandal proof |
No
|
|
| Operating temperature |
-10 to +85ºC
|
|
| Storage temperature |
-20 to +70ºC
|
|
| Relative humidity |
20 to 95%
|
|
| Environment |
Indoor
|
|
| IP rating |
IP32
|
|
| Regulatory | ||
|---|---|---|
| Compliancy |
CE
REACH
RoHS 3
WEEE
|
|
| Certification |
CPR
|
|
| Standards |
EN54-5, EN54-7
|
|
Downloads
All downloadsDatasheet
Installation sheet
Technical documentation
Other EU certificate
Other EU certificate
VMC_APF-1807_ZP-2
Other EU certificate
VMC_APF-1872_ZX832-3P, ZX832-3B
Other EU certificate
VMC_PR-2017/064_ZP2-A series
Other EU certificate
VMC_PR-1936/064_Ziton ZP-2 (2010-2 series)
Other EU certificate
VMC_PR-1751/064_ZP-2 (2010-2 series)
Other EU certificate
VMC_APF-1326_ZP2
CPD / CPR
Certificates
If available, the downloads of the Certificates, Software & Firmware and Media are displayed in their default language.