Skip to main content

178701

ZP755WV-2R Weatherproof Sounder/VID, red
  • Weatherproof
  • Sounder with visual indicator in a single unit
  • High sound output
  • Low current LED based visual element
  • High efficiency sound gun transducer
View all

At a glance

General

The ZP755WV-2R is an addressable, weatherproof sounder/beacon, designed for use on ZP addressable fire detection and alarm systems. The device is developed for outdoor applications.

Installed directly onto and powered by the ZP wiring loop, the ZP755 range enables the system designer to offer a complete ZP addressable system on a single pair of wires. Installation costs are greatly reduced, whilst system integrity, sounder options and programmed alarm organisation are significantly increased.

High efficiency, low energy design

High efficiency acoustic design, low energy sound gun transducer and low current Light Emitting Diode (LED) visual element, enables up to 24 sounder beacons to be connected to a one kilometer loop of 1.5 mm² cable, with a wiring run of 50 m to the first device.

In systems where loop lengths or current requirements are excessive, ZP755WV-2R sounder beacons can be powered directly from an external power supply.

Range of sound outputs

Continuous, intermittent and two-tone audible outputs are available from which any combination can be chosen to provide alert and evacuate, two stage alarms. All sound types comply with most local codes (for example BS 5839 Part 1 recommended frequencies in the UK). The ZP755WV-2R produces a sound output of 95 dBA, measured at 1 m. A volume control is included for areas where a reduced sound output is required.

Molded in high impact red thermoplastic, the sounder beacon features a red lens.

Details

  • Weatherproof
  • Sounder with visual indicator in a single unit
  • High sound output
  • Low current LED based visual element
  • High efficiency sound gun transducer
  • Up to 30 devices powered directly from loop wiring
  • EN54:3 approved and CPR certified

Technical specifications

General
Compatibility
ZP7 Series Systems
Line monitoring
Open/short circuit
Addressing method
DIP Switches
Monitoring
Device removal
Device type
Sound output
Devices per loop <30 (1 km loop of 1.5 mm² cable, 50 m to first device)
Addressing method 7 way dip switch
Electrical
Operating voltage
Loop 19.5 to 20.5 V
External 18 - 30 VDC
max. 4 V line loss
Current consumption
<820 μA (Quiescent - when loop powered)
<9.6 mA (Active - when loop powered)
<470 μA (Quiescent - when externally powered)
<500 μA (Active - when externally powered)
Sounder
Output level
<90 dB(A) (Tone dependent)
Frequency
980 Hz (continuous)
980 Hz (0.5 sec on/off)
980/670 Hz (warble)
Selectable tones
User configurable
Synchronization
Automatic
VID
Colour
Red
Rating
1 J
Flash frequency
0.8 Hz
48 flashes/min
Synchronization
Automatic
Light source Red LED array
Physical
Physical dimensions
120 x 150 mm (Ø x H)
Net weight
300 g
Colour
Red
Mounting type
Surface mount
Mounting position
Ceiling
Wall
Material
Moulded thermoplastic
Wiring 2 core loop
Environmental
Vandal proof
No
Operating temperature
-25 to +70°C
Storage temperature
-25 to +70°C
Relative humidity
10 to 95% noncondensing
Environment
Outdoor
IP rating
IP33C
Regulatory
Compliancy
CE
REACH
RoHS 2
Certification
CPR
Standards
EN54-3